As for the equipment, for the sake of safety, no matter which type of equipment has its own set of operating procedures. For example, for waste gas treatment equipment, operators strictly abide by the operating procedures, can easily master the use of environmental protection waste gas treatment equipment, and can also ensure the safety of personnel and machines. Before running the waste gas treatment equipment, we should understand the equipment operation regulations:

Environmental waste gas treatment equipment

1. The waste gas treatment equipment shall run synchronously with the production process equipment producing waste gas. When the equipment stops operation due to emergency or equipment maintenance, it shall be reported to the local administrative department of environmental protection immediately.

2. The emission of waste gas during the normal operation of the equipment shall comply with the national or local air pollutant emission standards.

3. The equipment shall not be overloaded.

4. Enterprises should establish and improve the rules and regulations related to the waste gas treatment equipment, as well as the operation, maintenance and operation procedures, and establish the account system for the operation of the main equipment.

What are the operating procedures for environmental waste gas treatment equipment?

1. Turn on the main power switch;

2. Open the control valve of No.1 or No.2 filter tower and start the circulating water pump;

3. Open the paint filtration system for oil-water separation;

4. Turn on the exhaust fan, start the waste gas activated carbon treatment system, and discharge the waste gas up to the standard;

5. The company of waste gas treatment equipment shall often clean or replace the paint filtration system to keep it in good working condition;

6. Clean or replace the waste gas activated carbon treatment system to keep it in good working condition all the time;

7. Clean and maintain the exhaust fan and circulating water pump to keep them in good working condition;

8. At the end of work or after work, close the door, turn off the main power supply, clean up the paint filtration system and exhaust gas activated carbon treatment system, maintain the fan and circulating water pump, clean up the site sanitation, and make records carefully.